freeloader
08-06-2022, 08:10 PM
Was going to build a forged bottom end for my turbocharged '06 but have decided to do a Coyote swap instead.
Selling the following parts...
Nemak 4.6L block.
Ford Mustang Cobra 4.6L Forged 8 bolt Kellogg Crankshaft
Eagle forged rods with 8740 rod bolts (will need upgrading to ARP 2000 for 800HP+)
Manley .30 over pistons, -18cc dish (8.75 to 9:1 compression depending on head CC)
GT500 oil pump, windage tray and pickup tube.
$2500, will need machine shop work, con rod and main bearings, pistons rings to complete build.
https://i.ibb.co/Qv3znrC/20220806-195040.jpg (https://ibb.co/Qv3znrC) https://i.ibb.co/hYsRH64/20220806-195057.jpg (https://ibb.co/hYsRH64) https://i.ibb.co/1MX3mPb/20220806-195102.jpg (https://ibb.co/1MX3mPb) https://i.ibb.co/QJNbKkH/20220806-195150.jpg (https://ibb.co/QJNbKkH) https://i.ibb.co/7bggQ23/20220806-195239.jpg (https://ibb.co/7bggQ23) https://i.ibb.co/p35jrGM/20220806-195245.jpg (https://ibb.co/p35jrGM)
Selling the following parts...
Nemak 4.6L block.
Ford Mustang Cobra 4.6L Forged 8 bolt Kellogg Crankshaft
Eagle forged rods with 8740 rod bolts (will need upgrading to ARP 2000 for 800HP+)
Manley .30 over pistons, -18cc dish (8.75 to 9:1 compression depending on head CC)
GT500 oil pump, windage tray and pickup tube.
$2500, will need machine shop work, con rod and main bearings, pistons rings to complete build.
https://i.ibb.co/Qv3znrC/20220806-195040.jpg (https://ibb.co/Qv3znrC) https://i.ibb.co/hYsRH64/20220806-195057.jpg (https://ibb.co/hYsRH64) https://i.ibb.co/1MX3mPb/20220806-195102.jpg (https://ibb.co/1MX3mPb) https://i.ibb.co/QJNbKkH/20220806-195150.jpg (https://ibb.co/QJNbKkH) https://i.ibb.co/7bggQ23/20220806-195239.jpg (https://ibb.co/7bggQ23) https://i.ibb.co/p35jrGM/20220806-195245.jpg (https://ibb.co/p35jrGM)