PDA

View Full Version : Thanks Diego



86gtvert
07-04-2015, 07:41 PM
Hi I havent been on here in a while and dont post much.I just wanted to thank Diego again for tuning my fox.My car made 406 rwhp and 395 torque on 7 pounds boost and best part is I put it all together.Cheers.

ZR
07-04-2015, 11:26 PM
No surprise your happy with a tune he did, skilled hands.

99chromegt
07-05-2015, 01:07 AM
Congrats. Nice #s I know that DCT feeling... :)

Scott
07-05-2015, 06:36 AM
Congratulation on the build and fine numbers!

Ray721
07-05-2015, 07:58 AM
Congrats, nice numbers!

Tailites
07-05-2015, 10:29 AM
nice numbers for only 7 psi...

any pics of the build?...or at least specs on the combo?

86gtvert
07-05-2015, 11:51 AM
Thanks guys very happy with numbers..Tailites its a stock block b cam , tfs tw 170 heads tfs rockers, gt40 tubular intake 90mm sct mass air , powerpipe and entry level vortech sci with stock pulley.It pulls very hard lol I didnt take any pics too busy working on it.

86gtvert
07-05-2015, 12:30 PM
20150703_161132

86gtvert
07-05-2015, 12:34 PM
Trying to post a dyno vid from tablet cant figure it out.

HyperGT
07-05-2015, 01:10 PM
perfect street machine, numbers i would like to see one day in my vert!

86gtvert
07-05-2015, 02:06 PM
Thanks HyperGt..forgot to mention its a stock 92 block and tuned for 94 octane.

Tailites
07-09-2015, 08:41 PM
Thanks guys very happy with numbers..Tailites its a stock block b cam , tfs tw 170 heads tfs rockers, gt40 tubular intake 90mm sct mass air , powerpipe and entry level vortech sci with stock pulley.It pulls very hard lol I didnt take any pics too busy working on it.

nice little build...I like it

any future plans to get serious with the boost?

7 psi is not a lot...very conservative...but pretty safe on that combo

& likely will cause you no grief at all on the stock bottom end

86gtvert
07-09-2015, 10:43 PM
nice little build...I like it

any future plans to get serious with the boost?

7 psi is not a lot...very conservative...but pretty safe on that combo

& likely will cause you no grief at all on the stock bottom end

Thanks Tailites.Im going to drive it as is this summer then maybe over winter go with an 8 rib set up with 7 inch crank pulley..hopefully get 10 pounds boost.

Slick_89_Hatch
07-11-2015, 01:29 PM
Thanks Tailites.Im going to drive it as is this summer then maybe over winter go with an 8 rib set up with 7 inch crank pulley..hopefully get 10 pounds boost.

I have a similar set up in my car with almost the same power, stock 93 block though. 5 years and running strong. Enough power for some fun but great reliability.

86gtvert
07-11-2015, 04:05 PM
I have a similar set up in my car with almost the same power, stock 93 block though. 5 years and running strong. Enough power for some fun but great reliability.

Yeah it drives pretty stock like till you stomp on it... very fun. How much boost you running and how much rwhp?

Slick_89_Hatch
07-12-2015, 12:38 PM
7-8lbs of boost and makes about 390rwhp.

86gtvert
07-12-2015, 01:38 PM
7-8lbs of boost and makes about 390rwhp.

Nice..so im guessing the 12.6 is with a street tire?

Slick_89_Hatch
07-12-2015, 09:31 PM
With a DR, but my 60' was around 2.0. Couldnt get the car to hook and that was basically off idle. Car has 11's in it, but it needs to hook and a better driver lol. Those 17x10 and 17x9 boat anchors I have for rims don't help either!

86gtvert
04-22-2016, 06:57 PM
Would like to thank Diego@ dct again on retuning my car...made 483 to the wheels 447 torque on 10 #s boost on a safe tune!

ZR
04-22-2016, 09:00 PM
Now your making serious jam, congrats.

Arboc
04-23-2016, 07:48 AM
nice numbers. nice build. DCT :)