Recently installed front 94/95 Mustang front spindles and an IRS from a 2004 Cobra in to my Foxbody. Big issue here finding wheel fitment for this set up especially for the rear. Can anyone help me out on this.
Printable View
Recently installed front 94/95 Mustang front spindles and an IRS from a 2004 Cobra in to my Foxbody. Big issue here finding wheel fitment for this set up especially for the rear. Can anyone help me out on this.
Hopefully either Gabe or Suki chime in, both have Mod Fox's.
05+ stock Mustang rims fit pretty well. I use Bullits.
Yes, 05+ wheels work well.
Currently I have 18 x 9.5” wheels with +38mm backspacing with 275 35 18 rubber all around, direct bolt-in in the back with 1/2” spacers and extended studs in the front.
I have a set of 18 x 9 +38mm 2018 Mustang PP2 chrome replica wheels with 245 40 18 Nitto NT05’s for sale that are a perfect fit on the car if you are interested
just checked, stock Bullets are 17x8 x45. There's room for fatter.
Control arm and K member used will affect the front. I do use spacers, but 1/4 or 3/8. My cars haven't been on the ground in a while so I don't recall exactly.
Yes i am interested can I get a phone number off you