Battery Change HELP!

My son-in-law’s daily driven 05 GT needs a new battery. When he tried to change it, the long hold down stud shaft snapped. Now he has a stub of a stud sticking out above the plastic anchor that secures the front of the battery. Not sure what to suggest to him he has tried the obvious as channel locks on the shaft with no joy. I thought of removing the tire well rear plastic panel, but as a I recall you only can see the bolts that hold the battery tray not the battery hold down stud itself. But I could be wrong.

Suggestions would be welcome?

Battery tray unbolts / removes from the car easily to get at it better.

Good suggestion Rick, thanks!

I will have to remove the rear inner plastic shield to take a look. I just found an old picture when doing the air lift install on my car. In this picture my battery had already been relocated to the trunk. Will have to look on Ryan's car to see if this plate and the two bolts are the only ones that secure the battery tray.

https://i.imgur.com/eOybdsF.jpg

If all else fails read the manual. Exploded view of the battery tray shows three bolts and they look to be accessible (to be cut off at least from the tire well) Two are clearly visible in the picture, the third is just above the ground wire.

Pop tray out takes only a moment or two, pretty sure it has three that secure tray to the car, hold down is on the tray itself.


https://cfc7329ad537523a5de1-b21544d...k_cfe21bf4.jpg

I can verify that the battery tray is easy to get out


Sent from my iPad using Tapatalk

Thanks Nick, BTW the battery tray is easy to get out only when the battery is NOT on top of it! lol

Done, cutting from the tire well did the trick!

Quote:

---

Originally Posted by Scott

Done, cutting from the tire well did the trick!

---

its never simple when modern cars age...nice work!

Quote:

---

Originally Posted by hammerhead

its never simple when modern cars age...nice work!

---

He got it Gerry but a daily driver 05 comes with plenty of challenges. Next opportunity somehow the thermostat housing broke during maintenance.

Had a couple in broken from corrosion.

Quote:

---

Originally Posted by ZR

Had a couple in broken from corrosion.

---

Rick do you know if they are still available from Ford, I have a message into Ed but do you know?