I'm either a genius or an idiot

Printable View

06-09-2020, 01:39 PM
m_owing

2 Attachment(s)

I'm either a genius or an idiot

Attachment 20798
Attachment 20799
I took the midpipe out of the hanger on the transmission, shown in the picture, and placed the exhaust hangers on top of that hanger bracket. I gained valuable ground clearance.

Ever since I lowered my fox I've had problems with the exhaust hitting the ground. short headers, bbk midpipe, magnaflow catback, all 2.5" I'm not going to custom weld it all in place, I need it to be modular and use clamps so I can take it on and off when I do repairs.

So either I found the fix everyone needs or have yet to realize this was a bad idea. But, if you struggle with exhaust scraping maybe you can use this!
06-09-2020, 02:11 PM
fast Ed

If your hanger bracket still had the rubber isolators in good shape, with the way you have the pipe set now you would likely get more NVH coming through the car. But since it looks like your isolators are pretty narfed anyway, probably not much difference. So the exhaust gets tucked up another 1/2 to 3/4" I guess? No problems with interference on the floor pan or other parts?

cheers
Ed
06-09-2020, 02:14 PM
RedSN

Quote:

Originally Posted by m_owing

...and placed the exhaust hangers on top of that hanger bracket. I gained valuable ground clearance.

Pics?

edit: and all the other stuff Ed just said
06-09-2020, 02:58 PM
hammerhead

you could also shorten your exhaust hangers and slide it back in....
06-09-2020, 09:42 PM
m_owing

Quote:

Originally Posted by RedSN

Pics?

I didn't take any. Between all the swearing and hitting things with a hammer I never seem to think of pulling out my camera.

Quote:

Originally Posted by fast Ed

If your hanger bracket still had the rubber isolators in good shape, with the way you have the pipe set now you would likely get more NVH coming through the car. But since it looks like your isolators are pretty narfed anyway, probably not much difference. So the exhaust gets tucked up another 1/2 to 3/4" I guess? No problems with interference on the floor pan or other parts?
cheers
Ed

These weren't my pics. My isolators are pretty ok. I misaligned one of the tailpipes and its bouncing off the subframe that's near the wheel well. And I think the 1/2" closer to the floor is making my 10 year old undercoating a little hotter and smell.

Quote:

Originally Posted by hammerhead

you could also shorten your exhaust hangers and slide it back in....

I'm not sure I can do this. The hangers are thick metal rods welded to the mid pipe.