Printable View
Anyone have any pictures of where the factory horns mount in these cars? Trying to get horns to work again in this car, ever since they were "relocated" for the meth pump they haven't worked. Assuming based on how the bracket and wiring looks they ground directly to the frame rail then get 12v + from the two black plugs.
https://photos.smugmug.com/94-Mustan...8E4E733-X3.jpg
Driver side, behind the parking light. You can just barely see the top of the horn through that hole. I will try and find a better pic of when I was doing the oil cooler.
I have my driver fender off on my fox that I can send pics, if someone can confirm it is the same arrangement. Same spot as what Don references above
It looks like I'm missing a bracket. From what I can tell there should be a a metal V bracket bolted to frame horns, and the horn assembly bolted to that.
Attachment 22935
Hopefully this is helpful?
It is. I'm absolutely missing a bracket.
My build thread has photos of my relocated horn beside my meth pump in fender.
Attachment 22944 this 1988 fox was pretty horny - left front corner under the washer fluid thingy - ahhhh the 80’s I remember them well #oxymoron lol
So bolted the assembly right to the frame with a rivnut, nothing. Flap wheeled the area it contacted as well as the bracket horns ground to and bam have horns. And they LOUD. Seems like these things need a really good ground.