Be interesting to see price of HP gains with cost of cat removal.
Same with other add on's
Loading...
|
Type: Posts; User: Spock; Keyword(s):
Be interesting to see price of HP gains with cost of cat removal.
Same with other add on's
Not for Mustangs just F150's & Expeditions
www.deferdorshield.com
Multigroove belts are a lot better & longer lasting than the V belts of the past.
I think the bearing quality in the pulley's is on the decline in the newer vehicles
Light blue & red is pretty much always cluster & switch illumination
Probe it & see if a test lamp lights up with the headlamp switch turned on & if you can dim it
There was never a passenger seat belt connector only drivers 91-92
What colors are the connector wires in question?
The proper way is to pressurize the system with conformal gas & find the leak with an electronic detector.
A budget way would be to pressurize with air & use a soapy solution in a spray bottle
Dont you need to clean the contacts on the test port first?
Might be better to relocate if your going to mess with tunes
Leave it there!
A thief thinking there's a skunk under the car is one of the best Anti-theft devices out there
7 kits available
https://www.kijiji.ca/v-view-details.html?adId=1562877505
O2's & long tube headers don't work well on stock tune... they run too cold
Did you have it oil sprayed? Yes = FTP sensor
low charge will make the compressor make noise, have it checked
Model A, Model T....Model E
Could have been a great advertising commercial running through the history of Ford
Smoke machine is a good start
The Electric Mustang might be #4 now
How many people do you think could live with not being able to use their phones in the car?
Im guessing less then 10%
do you have signal at the ignition switch?
Muscle Car Era 2.0 is here !
Interesting project but "Without a drop of fuel" is a stretch...How did they charge it?
Maybe a better name is invisible rolling coal
The dominant energy sources in Indiana and the United...
sounds like the pump is seized if the motor works when off the pump
can you turn the pump by hand?
Not if there Brembo's, their heat treated surfaces
There is about 10% drop in illumination with drl , pretty tough to see it
I would want to see what the GM service manual says about machining rotors with Brembo Parts
Brembo rotors are hardened & cannot be machined
Replacing ordinary rotors gets you a part warranty, machining does not so you have to figure out the difference
With all the brine they spray on the...
Wonder how much the insurance is?
Gotta be pretty steep to let guys go nuts with someone else's car
