So nearly a year later and i finally have this problem solved.
I read an old Corral post about temp sensors being recalled in the late 90s.
Sure enough, the one in this car was reading low...
Loading...
|
Type: Posts; User: Frankie; Keyword(s):
So nearly a year later and i finally have this problem solved.
I read an old Corral post about temp sensors being recalled in the late 90s.
Sure enough, the one in this car was reading low...
So the old Cobra needs valve stem seals - 4.6 32V N/A .
Who's best for this part? Is OE still the way to go? MMR looks to have a good set.
You could always put a capacitor across the meter to try and slow the movements (by slowing the change of the input).
Might take a bit of experimenting to find the right value, probably start with...
did you find a set?
https://www.fatfoxx.com/
Wierd ignition related issues.
PIP, TFI and coil all together are under $200.
Considering you are dealing with 35 year old parts, that's cheap insurance.
The PIP is a semiconductor device. If it's suspect, you just have to replace it - resistance will only tell you if its burnt completely.
I bought the last couple i installed from RockAuto, had...
Sounds like TFI or PIP problem.
I'd pull the distributor and replace both.
And the igintion coil for good measure - a bad coil can kill a new TFI and a bad TFI can kill a new coil - best to just...
- I will hook up my scan tool and find out. Thanks for the suggestion.
I would say it will most likely read correctly because of the noticeable difference in how well it runs when hot.
- Car is...
Both my factory gage and my Autometer gage show low so it cant be a gage problem.
Its been that way since before my ownership.
I've got a weird problem with my 99 Cobra that maybe someone here has some insight on.
It runs around 150 degrees when driving down the street at any speed over 60kph.
Even colder when the...
2 separate spam offers for this part this week - close it up!
Rims sold over the weekend!
I'm selling this set of rims for a friend.
They have major clearcoat peeling around the outside lip.
Original ford 17x8 with 45mm offset.
Make a reasonable offer around $250 for the set.
...
Like the title says, just the crank pulley
Even if it passes the above - it could still have a leaking seal(s).
For the cost of it, i'd start with a new compressor if you can swing it.....in around $300 on RockAuto
Looks like some nice parts.
My guy works for free, as long I come over and have coffee with him and my mother once a week :-)
If you probe the male end is there power on it?
Looks like the connector for the power lumbar to me.
Car is off the market.
She's staying with me!
There's one for shorty headers up on FB marketplace with some MAC mufflers.
Stock catted H-pipe back on the car now. The Magnaflow one has a rattling cat.
One more price drop, now $20K.
Another drop to $22,000.
Planning to be at the Delhi Mustang Roundup this weekend if you want to see it in person.
Always a great show! I'll see you there!
Price reduced to $24,900.
Try your offers.