Search:

Welcome!

Welcome!

Welcome to TMC!

In my S197 had a 1lbs in front of the passenger seat until I put in the 15 - 17 Recaro seats, then moved it to the harness bar in between the seats. Have been doing a little bit of research on S550...

My GT Premium 401a has them.

Rick I bought a ZL1 front tow hook on sale back in September but have not taken it out of the box. Sorry not much help!

As an owner of a 70 Boss 302 (however needs a lot of TLC) the Hagerty value is the part of the article I found very interesting:

1969 Mustang Boss 302

Engine V-8, 4942 cc
Power 290 hp @ 5800...

Wicked, congratulations!

Al if you decide to go with carb rebuild the GHMA guys often use Vic Matkars carbdr1@yahoo.ca

When I built my diff I used this torque wrench, as I recall it was for bike spokes or something.

https://i.imgur.com/edqIfJL.jpg

For $1275 I think you are talking about this one for 2018+? No intake manifold, just spacer throttle body, tuner, tune and open CAI.

https://performanceparts.ford.com/part/m-9603-m8b

ED's the man!

Sweet colour and nicely optioned, congratulations Martin!

Congratulations, very much looking forward to pictures in May!

I know the 2013/14 GT500 housings use yet again a larger size pinion bearing. When I built my 8.8 based on a 13 GT500 housing the inner pinion bearing that came from the Ford Racing M-4210-B1 kit was...

Before and after pictures are absolutely required!

Insurance comes of my 08 October 1st. Personally I prefer to do an oil change before storage.

Weather will dictate when Orange Fury takes her nap.

Looking for "I have used them" recommendations on a "no touch rim" shop to mount and balance 19x10 and 19x11 rims. Ideally in Vaughan, Aurora or Newmarket? Thanks!

Well how about an update and installed pics?

Rick do you know if they are still available from Ford, I have a message into Ed but do you know?

He got it Gerry but a daily driver 05 comes with plenty of challenges. Next opportunity somehow the thermostat housing broke during maintenance.

Done, cutting from the tire well did the trick!

Thanks Nick, BTW the battery tray is easy to get out only when the battery is NOT on top of it! lol

If all else fails read the manual. Exploded view of the battery tray shows three bolts and they look to be accessible (to be cut off at least from the tire well) Two are clearly visible in the...

Good suggestion Rick, thanks!

I will have to remove the rear inner plastic shield to take a look. I just found an old picture when doing the air lift install on my car. In this picture my battery...