Search:

Welcome!

Welcome!

Welcome to TMC!

Welcome and congratulations!

Welcome!

In my S197 had a 1lbs in front of the passenger seat until I put in the 15 - 17 Recaro seats, then moved it to the harness bar in between the seats. Have been doing a little bit of research on S550...

My GT Premium 401a has them.

Welcome to TMC!

Rick I bought a ZL1 front tow hook on sale back in September but have not taken it out of the box. Sorry not much help!

As an owner of a 70 Boss 302 (however needs a lot of TLC) the Hagerty value is the part of the article I found very interesting:

1969 Mustang Boss 302

Engine V-8, 4942 cc
Power 290 hp @ 5800...

Wicked, congratulations!

Al if you decide to go with carb rebuild the GHMA guys often use Vic Matkars carbdr1@yahoo.ca

Congratulations and welcome to TMC! However, it didn't happen until we see pictures!

When I built my diff I used this torque wrench, as I recall it was for bike spokes or something.

https://i.imgur.com/edqIfJL.jpg

Welcome to TMC!

Welcome to TMC!

Welcome to TMC!

For $1275 I think you are talking about this one for 2018+? No intake manifold, just spacer throttle body, tuner, tune and open CAI.

https://performanceparts.ford.com/part/m-9603-m8b

ED's the man!

Sweet colour and nicely optioned, congratulations Martin!

Congratulations, very much looking forward to pictures in May!

Zee welcome to TMC!

I know the 2013/14 GT500 housings use yet again a larger size pinion bearing. When I built my 8.8 based on a 13 GT500 housing the inner pinion bearing that came from the Ford Racing M-4210-B1 kit was...

Bill welcome to TMC!

Before and after pictures are absolutely required!