Yes, shim the lower stud where the mount goes into the subframe, not the upper engine mounts. You can also use a level on the intake, to allow you to possibly just shim the driver’s side to get the...
Loading...
|
Type: Posts; User: Ponyryd; Keyword(s):
Yes, shim the lower stud where the mount goes into the subframe, not the upper engine mounts. You can also use a level on the intake, to allow you to possibly just shim the driver’s side to get the...
If they’re old mounts they’re probably collapsed, depends how much you shimmed them, I guess. Pretty simple to do though, why not keep going till it clears? Are they 1 3/4” primaries?
Also is the...
I sent you a pm a few days ago for your phone number or contact info.
If they’re there........
I’ll pass the info on, what’s your location?
Anything is better than nothing, if you have a big fire there’s not much you can do, but a small unit will be useful to a degree, or to help with the big fire if needed. If you have nothing and end...
Lol, it’s for a buddy, I don’t want to screw around making a fox/sn one fit...
^Bolt it down in the trunk, worst case scenario is it banged around in there, no big deal. Mine never moved though, no accidents but a lot of spirited driving in a lowered car.
I think it was...
I just got a small one from Canadian tire, mounted it in the trunk on the mount it came with.
Looking for a complete 8.8 for a new edge
Damn, Costco ftw!
Do a 10” cuz it looks cooler, otherwise there’s no point. You can run your 275 on a 10” wheel no problem, I did on my old Bullitt and I loved the look, it was a bit stretched, but not much, I also...
Ya, why give the enthusiasts what they want when you can just be greedy.
Yup, no worries. More often than not, they stick up (vented) since they done really move.
Damn, that’s hard to look at....liver lips.
I only see one hole there, would be pretty easy to swing by an exhaust shop and ask them to seal it up, might not even charge you, even if they do it would be $20 max. Welding inside a tube like that...
^Agree with the above, Ultra-Flows are a great muffler, but on a stock car they sound quite a bit like a stock muffler......I like the sound of flows around town, but could never tolerate them on the...
A 95 R just sold around here for like $15k, I was very surprised.
We’ve used Canada Speedometer in the past, no complaints, they’re in ingersoll.
Apparently the GT350 trans is rated for lower power than the MT82, and was only selected for feel.
MT82s have been junk for the most part, but many are surviving behind a lot of power with just a...
Mach 1, no shaker? Boooo
86 GT hardtop, classic style, love the 4-eye, prefer Capri RS but mustangs only
93 Cobra, always wanted one, looked at 3 in the US but all had issues I couldn’t deal with at the time, in hindsight...
^Yes! I guess it’s kinda cool in a way, but it should never, ever be called a Mustang, and it should never, ever be referenced in a performance light...that thing is a tall wagon, less “cool” than a...
$4-5k I’d say
Meh, looks like a baby rover mixed with a renegade....I’m sure it will sell very well but let’s see the big boy!