Need some help please

[ZR]

Positive you ended up with returnless pumps?

[ZR]

Summit racing, sold under the ATL brand as corrugated fuel tube.

https://www.summitracing.com/int/sea...illocation=int

Mint, thank you Sir.

[maxwell6]

I hope they were but would they have lasted as long as they did, or would i have found out right away. I did order for returnless system. I will look up the part number and make sure.

[ZR]

Wrong pumps, you read about some failing or not working correctly right from the get go while others hang in for a time. By any chance you running a Boost A Pump or similar? Been involved with more than one that was a pump eater.

[Laffs]

Mint, thank you Sir.

No problem. I found the easiest way to install them was to stick the ends in boiling water to expand them. They slide right on in that case. Once cooled and clamped they're not coming off without being cut.

[ZR]

Boiling water, excellent idea.

[maxwell6]

Yes am running a Boost a pump was thinking the same bap killing pumps. Going to go forward from here.

[ZR]

With dual supercar pumps and dual FPDMs, absolutely no upside to running a Boost a Pump or similar. Mine makes 600 flat at the tires and is no where close to being maxed out on fuel (Fore' hat / dual supercar pumps + dual FPDMs).

[ZR]

While it's apart, also worth checking polarity to both pumps is correct.

[maxwell6]

Thanks ZR I did check polarity and it is correct. I will not be using the bap anymore.