Loading...
Remove Text Formatting

Likes Likes:  45
Page 5 of 7 FirstFirst 1234567 LastLast
Results 41 to 50 of 64

Thread: School me on supercharging my 5.0

  1. #41
    nom nom nom RedSN's Avatar
    Join Date
    Mar 2014
    Location
    Markham
    Posts
    11,062
    edit: corrected for accuracy ...... 'there'
    -Don____________

  2. #42
    Member 1986stangfan's Avatar
    Join Date
    Mar 2014
    Location
    Orono, ontario
    Posts
    1,293

    School me on supercharging my 5.0

    Ordered a SCT maf, and working in building a new/custom cold air intake.
    Also looking for heads and a cam, and new lifters while is at it.

    Sent from my iPhone using Tapatalk

  3. #43
    Club Supporter The Newmare's Avatar
    Join Date
    Mar 2014
    Location
    Trenton
    Posts
    1,457
    I think I still have 2 pullies,will try to locate them and see what sizes?

    2019 Roush Race Red RS3 Mustang GT
    2019 White Jeep Cherokee 4x4 Ltd
    2019 Chevy Equinox AWD

  4. #44
    Member 1986stangfan's Avatar
    Join Date
    Mar 2014
    Location
    Orono, ontario
    Posts
    1,293
    Quote Originally Posted by The Newmare View Post
    I think I still have 2 pullies,will try to locate them and see what sizes?
    That would be amazing.


    Sent from my iPhone using Tapatalk

  5. #45
    Member
    Join Date
    Feb 2015
    Location
    maple
    Posts
    266
    Quote Originally Posted by 1986stangfan View Post
    Ordered a SCT maf, and working in building a new/custom cold air intake.
    Also looking for heads and a cam, and new lifters while is at it.

    Sent from my iPhone using Tapatalk
    Don't you need the chip also?

  6. #46
    Member 1986stangfan's Avatar
    Join Date
    Mar 2014
    Location
    Orono, ontario
    Posts
    1,293
    Well fellas, it looks like i am going to end up with a set of ported GT40 heads with 1.7 roller rockers. cam decision has yet to be cemented currently deciding between a TFS stage 1, Conor cams xe270hr, and steeda #19. Blowzilla will be going on with 42lb injectors. Should feel like a totally different animal.

    Had made a deal on a set of tfs tw heads with 1.6 rr but while my wife was sick in the hospital the deal went south.
    Last edited by 1986stangfan; 02-25-2018 at 10:54 PM.

  7. #47
    Member 1986stangfan's Avatar
    Join Date
    Mar 2014
    Location
    Orono, ontario
    Posts
    1,293
    On a tight budget so trying to make wise decisions.

  8. #48
    Member
    Join Date
    Jan 2015
    Location
    KW
    Posts
    319
    Thread jack, any suggestion where one can get a MS2 pnp. I am interested. Rather blow my own stuff up then let localish tuners do it.
    Thanks

  9. #49
    Member
    Join Date
    Mar 2014
    Posts
    59
    Quote Originally Posted by OldSchool View Post
    Thread jack, any suggestion where one can get a MS2 pnp. I am interested. Rather blow my own stuff up then let localish tuners do it.
    Thanks
    https://www.diyautotune.com/shop/msp...pnp-gen2-ecus/

    That's where I got mine from a few years back. www.efianalytics.com has some info on the Tunerstudio software to look at as well. Tech support has been great, I'm still not dialed in 100% but my junk hasn't left the garage much in the past few years to get it sorted. Other than some idle tuning still to deal with, part throttle and power runs are performing well. Just keep everything conservative at first and sneak up into it. Some of the autotune targets are a bit aggressive for my liking, but they are easily tweaked if you opt to use that feature.

  10. #50
    Member 1986stangfan's Avatar
    Join Date
    Mar 2014
    Location
    Orono, ontario
    Posts
    1,293
    Turns out the lower intake that cane with the Kenne Bell supercharger I bought is from an explorer and not a true gt40 or cobra lower intake. Normally I wouldn’t care but with the explorer intakes apparently they move the supercharger forward 1/8” which causes pulley alignment and belt throwing issues. Dang

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service