What are these heads worth?

[1986stangfan]

Used pair of Edelbrock 60379 heads





https://www.americanmuscle.com/edelb...s-50-pair.html



Sent from my iPhone using Tapatalk

[Ponyryd]

Around a grand if they’re in working order, tough to tell by the pics but the valves don’t look great.

[1986stangfan]

Rick any input?


Sent from my iPhone using Tapatalk

[ZR]

As said above, hard to tell from pics but in usable as is condition I'd also say in the 1k or slightly above range.

[1986stangfan]

As said above, hard to tell from pics but in usable as is condition I'd also say in the 1k or slightly above range.

Thanks, I was mostly meaning in regards of condition. I know you’re the Gandalf of mustangs


Sent from my iPhone using Tapatalk

[ZR]

Unless you know exactly where they came from, always best to pay machine shop to go through em before installing.

[1986stangfan]

Decided to go with a brand new set of e street heads


Sent from my iPhone using Tapatalk

[4GOTNPNY]

Decided to go with a brand new set of e street heads


Sent from my iPhone using Tapatalk

make sure you change the springs for your roller setup and i would change the rocker studs to ARP hardware the e streets are edelbrocks entry level head to compete with the chinese market rocker studs break and the springs to not support roller cams

[Cloud nine]

make sure you change the springs for your roller setup and i would change the rocker studs to ARP hardware the e streets are edelbrocks entry level head to compete with the chinese market rocker studs break and the springs to not support roller cams

I heard the same thing about those heads.

[juvehab]

make sure you change the springs for your roller setup and i would change the rocker studs to ARP hardware the e streets are edelbrocks entry level head to compete with the chinese market rocker studs break and the springs to not support roller cams

so they are good for nothing then.