Loading...
Remove Text Formatting

Likes Likes:  0
Results 1 to 4 of 4

Thread: tremec 3550/tko

  1. #1
    Member
    Join Date
    Jan 2016
    Location
    whitby
    Posts
    254

    tremec 3550/tko

    who has swaped the t5 for one of these im currently in the process of swapping my T5 out its not a fox but i wanted to know what you fox guys have done what did you have to change i noticed my cross member has to go for sure does the stock hight mount need to be changed as well?

  2. #2
    Member 2DXTRM's Avatar
    Join Date
    Mar 2014
    Location
    Toronto
    Posts
    341
    Can you flip the cross member (Right Side to Left Side) to get the mount to line up?

    Also, you will need at least a 3/8" shims (between trans mount and the trans itself OR between mount and crossmember) to make up for the pinion angle change.

  3. #3
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,213
    Good point on pinion angle. Well worth putting a gauge on it to be sure where you end up.

  4. #4
    Member
    Join Date
    Jan 2016
    Location
    whitby
    Posts
    254
    what should my pinion angle be? i can put a guage on it just want to know the proper degree before i fab anything up. cant turn the cross memeber around unfortunatly so i will be making a new one out of steel tubing

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service