Loading...
Remove Text Formatting

Likes Likes:  0
Results 1 to 4 of 4

Thread: Oil catch can question...

  1. #1
    Super Moderator Stephen06GT's Avatar
    Join Date
    Mar 2014
    Location
    Bolton
    Posts
    10,845

    Oil catch can question...

    I've searched the interweb and am getting conflicting answers to this question:

    Will a JLT or similar, driver's side oil catch can work/fit with an M90 supercharger on a 2006 Mustang GT?

    I know a few of you have boosted GTs, so does anyone first hand knowledge?

    Thanks

    Stephen

  2. #2
    Member Minaccia's Avatar
    Join Date
    Sep 2017
    Location
    Keswick
    Posts
    797
    Can't really answer your question but on the Coyote motors the passenger side can is always dry on my car and it's the passenger side that accumulates all the oil vapors.
    Barone Performance
    Canada's Online Aftermarket Parts Store

  3. #3
    Member NickD's Avatar
    Join Date
    Mar 2014
    Location
    Burlington
    Posts
    1,627
    As far as reaching and using the built in quick disconnects I don't know, that said I was able to use my UPR can just the same, inlet to valve cover, ouput to a vac source (back of the blower or elbow)
    I have found that I do smell stuff out of the passenger side valve cover which would normally go to the intake as a source of air into the crank case so maybe a good idea to put one on each side.

    Sent from my Nexus 9 using Tapatalk

  4. #4
    Monera3v
    Guest
    I built my own using the 5.0L hoses and UPR catch cane with the baffle at the bottom.
    Works great! still, see a lil oil at the TB, might do the passenger side next.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service