Loading...
|
2014 GT- MT 82, 3.73,Roush a/b, Forgestar f14 19x9/10 firestone firehawk indy 500- 255 F /285 R ,BMR springs sp009, pan hard, koni yellows ,m/m caster,
MGW XSPEC low profile 2.625in throw
slo turd 5.0, even slower driver
Nice, would hot have the heart to cut my hood though but understand why you are.
Are you sure hood pins are recommended for that hood looking at some of those pix on their site I don't see any of the cars using the hood pins and it would be a shame to cut up that hood if you don't need too.
Barone Performance
Canada's Online Aftermarket Parts Store
Im not positive
I had read on many retailers sites they recommended hood pins for all aftermarket fiberglass hoods.
For this one I don't know how much I trust the factory latch. The underside of the hood you can see above the fiberglass they have glued in a small piece of 2mm plywood and I think nuts glued to it. Based off how much the stock hood would lift at speed or in the wind I worried that it would crack. Although this shouldn't build up pressure as bad as the stock with the vents in the back.
I'll take some pictures tonight
Sent from my Pixel 2 XL using Tapatalk
Barone Performance
Canada's Online Aftermarket Parts Store
Curious Lou did Cervini do same thing with a block of wood secured to hood ?
Barone Performance
Canada's Online Aftermarket Parts Store
Lol @
Lou ur cousin
took the car out last week for a quick drive after ot driving it for weeks, hopped on the highway and did a 4th gear pull without thinking... hood doesnt need pins, I didnt see any flutter at end of the first straight at tmp speeds