Loading...
Remove Text Formatting

Likes Likes:  9
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: 04 Cobra Traction control/ABS question

  1. #1
    Member USAWIT2's Avatar
    Join Date
    May 2014
    Location
    Ontario
    Posts
    466

    04 Cobra Traction control/ABS question

    I recently picked an 04 Cobra, car has a custom tune that also disables the traction control. Which it not a big deal but the ABS light is also on.
    So my question, before I go and buy an obd2 scanner to check the codes on the ABS is the ABS light only on because the traction control is turned off permanently?
    Or are they no tied together in anyway?

    Thanks

  2. #2
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,213
    Normally when trac is shut off in the tune, ABS light is not on.

  3. #3
    Member USAWIT2's Avatar
    Join Date
    May 2014
    Location
    Ontario
    Posts
    466
    Thanks, kind of figured it shouldn't be. Guess I'll grab a scanner and see what codes it has.
    Last edited by USAWIT2; 11-16-2018 at 07:22 PM.

  4. #4
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,213
    Check all fuses first, next (if it's lowered) check for damage to the inner fender liner on the drivers side as harness is just above it.

  5. #5
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,213
    If it turns out to be a control module issue (most common in GT / Mach 1) dude on ebay rebuilds them.

  6. #6
    Member USAWIT2's Avatar
    Join Date
    May 2014
    Location
    Ontario
    Posts
    466
    Thanks, will do

  7. #7
    Why so serious Hotford's Avatar
    Join Date
    Mar 2014
    Location
    Pickering
    Posts
    270
    I have a good used one if ya need it.............pm me for price.
    2003 Azure Mach 1.....with some bolt on's.....
    2003 Marauder.....with some bolt on's....
    2011 GT500......with some bolt on's.......
    82 GT, Coyote, build in play.......

  8. #8
    Member USAWIT2's Avatar
    Join Date
    May 2014
    Location
    Ontario
    Posts
    466
    Quote Originally Posted by Hotford View Post
    I have a good used one if ya need it.............pm me for price.
    Thanks, will do

  9. #9
    Member USAWIT2's Avatar
    Join Date
    May 2014
    Location
    Ontario
    Posts
    466
    Quote Originally Posted by ZR View Post
    If it turns out to be a control module issue (most common in GT / Mach 1) dude on ebay rebuilds them.
    Just a FYI for those that might run across this thread searching ABS.
    I thought about sending my module to the guy on eBay, but after a little searching I ran across a company in Mississauga that does Abs and pcm repairs for different makes and models. 24hr turn around and repairs cost for me is $149+hst. Dropped it off this morning so we'll see how it turns out.

  10. #10
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,213
    Nice score, been looking for someone local.
    thanks for posting / yes please on results.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service