Loading...
Remove Text Formatting

Likes Likes:  0
Results 1 to 5 of 5

Thread: Ring and Pinion install

  1. #1
    Member
    Join Date
    Sep 2014
    Location
    Vaughan
    Posts
    98

    Ring and Pinion install

    Hey Peeps have a question for the panhard guys. Own a 93 and just finished a panhard install in the car. Will I have a issue with clearance when swapping the ring and pinion out with the panhard bar installed. Looks tight to the naked eye. The 2.73 gear is boring me out.

  2. #2
    nom nom nom RedSN's Avatar
    Join Date
    Mar 2014
    Location
    Markham
    Posts
    11,062
    Not hard to just unbolt the panhard bar.
    -Don____________

  3. #3
    Member
    Join Date
    Sep 2014
    Location
    Vaughan
    Posts
    98
    Quote Originally Posted by RedSN View Post
    Not hard to just unbolt the panhard bar.
    Thanks, i would prefer not to if the gear swap would be possible as I’m not installing the gear.

  4. #4
    Posting and liking.... Ponyryd's Avatar
    Join Date
    Mar 2014
    Location
    Windsor area
    Posts
    2,768
    Will surely be in the way, but as stated it’s quite simple to remove for access.

  5. #5
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,219
    +1 on all of the above.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service