Post whatever is on your mind!!

[ZR]

Okay stupid question.

Can I get away with reusing a copper head gasket? For the flat head
I’ve reused Copper exhaust manifold gaskets in the past with no issues

But never delt with a copper head gasket

If it's in good shape, spray with copper sealant n slap it back on.

[5.4MarkVIII]

If it's in good shape, spray with copper sealant n slap it back on.

thanks Rick.

[ZR]

Wipe all surfaces plus gasket with laq thinners n clean rag first.

[hsousa88]

Ehh... went for a ride tonight. Either some header bolts came loose or somethin else is up. Attempted to tighten when I got home but it’s way too hot under there.

[ZR]

Periodically checking header bolts (when engine is cold) = time well spent.

[Screw]

Periodically checking header bolts (when engine is cold) = time well spent.

Remember those days with my 83 wow , weren’t too bad to get to though , I look down at the 06 and I’m lost lol

[stangstevers]

So tempted to test out the linelock in the work place parking lot but I chickened out.

[ZR]

Headed to see Dad in hospital this am.

[mavrrrick]

Nothing serious i hope???

[ZR]

Took a bad fall at home on Sunday.