Post whatever is on your mind!!

[Laffs]

Were you lying?

Are you okay? Hopefully no burns.

There are two kinds of people...

[Stephen06GT]

There are two kinds of people...

I did laugh at your reply.

[Gabe]

Basically. 5 spoke, but these have a lip and are 19s



Try the Aodhan DS05

Thanks for the recommendation, but wish they didn't have the fake 3pc hardware around the perimeter of the wheel

[Laffs]

Thanks for the recommendation, but wish they didn't have the fake 3pc hardware around the perimeter of the wheel

Then you might prefer the Cosmis Racing XT-005R or Enkei TS-5.

[Laffs]

Are t you running a similar rim currently ?


Sent from my iPhone using Tapatalk

Here's a current to photoshop comparison.

[RedSN]

Nice looking wheel, but I like your current setup better.

*great photoshop!

[Screw]

Drove woodbine & steeles to hwy 7 , felt like I was doing open lapping at Cayuga

[Zippy]

Nice looking wheel, but I like your current setup better.

*great photoshop!

I like the blue calipers :P

[Gabe]

Then you might prefer the Cosmis Racing XT-005R or Enkei TS-5.

I do like the Cosmis wheels, but can't get the offset's that I need. Because of the IRS, I need 18 x 10 x 41mm offset or 7.1" backspacing. Front would work with 18 x 9 x 25mm (which is available). Car currently has 18 x 9 with 38mm offset and a 1/4" spacer, this would move the wheel out another 1/4" (preferable) and eliminate the spacer which is ideal.

I have been looking for a while, only options I can come up with are Weld Wheel SR-71's (look similar to the Cosmis) or CCW SP-500 (look similar to the Enkei's), but would be 4k for the welds and more for the CCW's.

[Laffs]

I like the blue calipers :P

My plan is to switch all my accent colours to a deep cobalt blue. Calipers/Seat Belt Webbing/Underhood piping/interior stiching/etc