Post whatever is on your mind!!

[xeninworx]

Looks great!

[mavrrrick]

Thanks


Sent from my iPhone using Tapatalk

[Scrape]

Looks good Jeff.

[Scrape]

Fun times.

Got this far with my headers.

Attachment 30168
Attachment 30169
Attachment 30170

Stud on the exhaust flange backed out of the header. Had to cut the stud. Which is fine as the AFE headers have their own locking nuts and bolts and I have spare stock studs anyways.

10 of the 12 studs came off the block. 4 of the nuts seized to the studs. Got the other ones off though. Not worried about the ones that are stuck as I bought a new nut and stud kit, mind you only comes with 6 studs and 6 nuts.

Will continue tomorrow.

[xeninworx]

Fun times.

Yep lol. Wasn’t that bad other than the stud that had to get cut. More tedious process than hard. Most annoying thing was loosening the nuts under the stock manifolds as I couldn’t see them. Pretty much just have to replace the studs and install the headers and tighten all the nuts down then it’ll be done.

[RedSN]

Studs coming out the block is fine. Studs snapping off in the block …..not so much fun.

[xeninworx]

Studs coming out the block is fine. Studs snapping off in the block …..not so much fun.

Yeah that would suck. More of annoyance putting the studs back in.

[5.4MarkVIII]

Studs coming out the block is fine. Studs snapping off in the block …..not so much fun.

that just the excuse you use to get the heads done.

[ZR]

Headers, fun times.

[xeninworx]

Just as I was putting the studs in, it starts raining. Blasphemy.