Loading...
Remove Text Formatting

Likes Likes:  17
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Basic car care stuff-black DD/family hauler

  1. #11
    Member
    Join Date
    Mar 2014
    Posts
    654
    On a black car, i would break down and do the ceramic coating.
    '21 F150 Screw 4x4 FX4 3.5 Powerboost (Iconic Silver)
    '21 Explorer ST (Atlas Blue)
    '19 Mustang Bullitt (Dark Hyland Green) Vortech Supercharged
    '11 Mustang GT 5.0L (Race Red) 8.92 @ 154 mph

  2. #12
    Super Moderator Scrape's Avatar
    Join Date
    Mar 2014
    Location
    GT-A
    Posts
    9,206
    Foam guns (cannons) have their pros and cons. I recently had a client ask me about this and said that his foam cannon wasn't doing a good job in foaming up. He had a power washer setup and a Amazon $20 deal. Soap wise he was using Meguiars Gold class soap. That being said the first issue is the soap mix is the most critical. Meguiars Gold Class is not an ideal soap for foam guns period. Lots of other brands out there that are designed to do this but that is another topic. My recommendation is a simple two bucket wash takes precedence over a foam gun unless your car is extremely dirty (Read: trail dirt, mud etc...) or you have intentions of stripping wax off the paint (Which is what I use a foam gun for). The process of foaming your car is for a pre soak process only and cannot be substituted for a wash.

    <u>

  3. #13
    Member NickD's Avatar
    Join Date
    Mar 2014
    Location
    Burlington
    Posts
    1,627
    Quote Originally Posted by Scrape View Post
    Foam guns (cannons) have their pros and cons. I recently had a client ask me about this and said that his foam cannon wasn't doing a good job in foaming up. He had a power washer setup and a Amazon $20 deal. Soap wise he was using Meguiars Gold class soap. That being said the first issue is the soap mix is the most critical. Meguiars Gold Class is not an ideal soap for foam guns period.
    Interesting your saying that as I experienced and I’ve seen many online discuss how good class does actually foam surprisingly well for a non foam soap. I’m guessing your friend had a low gpm pressure washer and the cheaper foam guns come with a larger orifice for use with gas pressure washers.


    Sent from my iPad using Tapatalk

  4. #14
    Club Supporter Laffs's Avatar
    Join Date
    Mar 2014
    Location
    Windsor, ON
    Posts
    4,554
    I've run the gold class and the wash n wax yellow in my foam gun. Neither has same results as say a Chemical Guys, but wasnt lacklustre and still did a good job.
    Quote Originally Posted by ludacris View Post
    I'm Supercharged with the HideAway License Plate

  5. #15
    Posting and liking.... Ponyryd's Avatar
    Join Date
    Mar 2014
    Location
    Windsor area
    Posts
    2,768
    Quote Originally Posted by Darkhorse View Post
    On a black car, i would break down and do the ceramic coating.
    Personally I see no benefit to CC over good wax/polish. I’m not in the industry but I’ve seen it done on several cars and was not impressed, seems like a fad to be honest.

    I appreciate the replies, I’ll stick to my mitt and bucket, and will look into a better wax.

  6. #16
    Member
    Join Date
    Mar 2014
    Posts
    654
    Quote Originally Posted by Ponyryd View Post
    Personally I see no benefit to CC over good wax/polish. I’m not in the industry but I’ve seen it done on several cars and was not impressed, seems like a fad to be honest.

    I appreciate the replies, I’ll stick to my mitt and bucket, and will look into a better wax.
    I was stubborn too until I saw it done correctly. The problem is most people don't know how to do it correctly. Repels water like nothing you've ever seen and no water spots/streaks.
    '21 F150 Screw 4x4 FX4 3.5 Powerboost (Iconic Silver)
    '21 Explorer ST (Atlas Blue)
    '19 Mustang Bullitt (Dark Hyland Green) Vortech Supercharged
    '11 Mustang GT 5.0L (Race Red) 8.92 @ 154 mph

  7. #17
    Club Supporter FABMAN's Avatar
    Join Date
    Mar 2014
    Location
    Woodbridge
    Posts
    1,225
    Quote Originally Posted by Darkhorse View Post
    I was stubborn too until I saw it done correctly. The problem is most people don't know how to do it correctly. Repels water like nothing you've ever seen and no water spots/streaks.
    I can vouch for that. Both my Mustang and X5 have it and it made a dramatic change. Deeper shine, less washing, more beading of water.
    FABMAN

  8. #18
    Posting and liking.... Ponyryd's Avatar
    Join Date
    Mar 2014
    Location
    Windsor area
    Posts
    2,768
    Quote Originally Posted by Darkhorse View Post
    I was stubborn too until I saw it done correctly. The problem is most people don't know how to do it correctly. Repels water like nothing you've ever seen and no water spots/streaks.
    The cars I saw were done professionally, at 2 different places. Each car showed water spots, as well as swirl marks and imperfections.....could have been shoddy work I suppose, but regardless I’m not impressed. I typically don’t believe the hype on anything until it’s actually proven to me.
    I do appreciate all the replies though.

    Still looking for a good wax for black cars that get driven year-round, cost is irrelevant, I want something durable, with a good deep shine.

  9. #19
    nom nom nom RedSN's Avatar
    Join Date
    Mar 2014
    Location
    Markham
    Posts
    11,062
    It’s a black DD. Throw in the towel now and just admit defeat. It’s always going to look dirty.

    Despite knowing that already, I still went and got a black DD. It just looked so damn good in the showroom.
    -Don____________

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service