Loading...
Remove Text Formatting

Likes Likes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Tire date code, where to look n how to read.

  1. #1
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,050

    Arrow Tire date code, where to look n how to read.



    Tires are just about the most important part of your car. If they're in bad shape, the car's ability to accelerate, stop, and turn in all conditions is greatly compromised. Everybody knows to replace tires when the tread gets down to the wear bar, but what about when they get too old?

    The rubber in tires deteriorates over time due to UV and environmental exposure. The resulting "dry rot" leaves tire structure brittle and leads to sidewall damage and eventual failure. This isn't "Oh I'll just fill it up and drive on it." No, this is complete loss of function.

    As a precaution, the Department of Transportation recommends changing even new-looking tires once they hit 10 years old, and many manufacturers recommend swapping them out at six years old. Of course, this aging is highly dependent on where the tires live. Tires in hot dry climates have much shorter lives than those in moderate, moist climates. Still, you want to maximize tire life when buying a new set of rubber.

    Since tires can sit in a warehouse for years, you'll want to know when the tires were made, rather than purchased, and there's an easy way to tell. Every tire has a "born-on date" molded into the sidewall and coded according to federal requirements. Near the edge of the rim, look for a long serial number starting with the letters "DOT." The code will end in either three numerals (pre-2000) or four (post 2000) and correspond to the two-digit week followed by the one- or two-digit year. For instance, the tire seen above has a code of DOT DA08 JM1R 3011, which would indicate a tire manufactured in the 30th week of 2011. DOT R5HG FHR 404 would indicate a tire manufactured in the 40th week of 1994 (or 1984, or '74). If you find your "new" tires are more than two years old, feel free to request a newer manufacture date or a discount from the salesman. The customer is always right, after all.

    In case you were curious about other elements of the code, "DOT" means the tire has passed the Department of Transportation's testing requirements. The next two digits are the tire plant code, followed by a two-digit tire size code, and then a four-digit manufacture's code. Now your neighbors will look at you funny when they catch you staring at your tires.

  2. #2
    Super Moderator Stephen06GT's Avatar
    Join Date
    Mar 2014
    Location
    Bolton
    Posts
    10,803
    Good info to know. Thanks.

  3. #3
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,050
    Becoming all too common to see outta date tires these days. For safety's sake, peeps need to be far more aware when purchasing new or used tires.

  4. #4
    Club Supporter Uncle Buck's Avatar
    Join Date
    Mar 2014
    Location
    Willow Beach
    Posts
    2,432
    Thanks Rick, great info. Ironically I was just looking at the tires on my daughters car and thinking they were getting old. Lots of tread but pushing 9 years old so its time for new shoes!

  5. #5
    Performance Redefined OneQwkStang's Avatar
    Join Date
    Mar 2014
    Location
    Greater Toronto Area
    Posts
    339
    What do you do when your tires become so old and still have 80% tread life because your car sits in the garage?

  6. #6
    Moderator Blackmare's Avatar
    Join Date
    Mar 2014
    Location
    Woodstock
    Posts
    4,589
    Quote Originally Posted by OneQwkStang View Post
    What do you do when your tires become so old and still have 80% tread life because your car sits in the garage?
    You buy new ones. Mine still showed 9/10ths with a tire depth gauge, but were getting up there in age.
    ~Scott B

  7. #7
    Performance Redefined OneQwkStang's Avatar
    Join Date
    Mar 2014
    Location
    Greater Toronto Area
    Posts
    339
    Quote Originally Posted by Blackmare View Post
    You buy new ones. Mine still showed 9/10ths with a tire depth gauge, but were getting up there in age.
    Too expensive...ill just let it continue to sit in the garage.

  8. #8
    Moderator Blackmare's Avatar
    Join Date
    Mar 2014
    Location
    Woodstock
    Posts
    4,589
    That works too.
    ~Scott B

  9. #9
    CHILL5.0
    Guest
    The neighbours might really look at you funny when they see you've wandered over to their driveway looking at their tires haha. Rick this should be a "sticky". Great info here for everyone.

  10. #10
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,050
    Done.
    Yes, good number of peeps cruisin around on tires that are too old to safely be used.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service