Loading...
Remove Text Formatting

Likes Likes:  97
Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 48

Thread: Old Fart's 04 GT

  1. #31
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    2,754
    Thank you very much Laurence, your tip saved the day!! The pic shows part of the stain removed as compared to above picture.

    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

  2. #32
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    2,754
    Did a 10W30 oil change tonight. Do I have a screwed-up oil dipstick or are they all like that, lol.



    Former owner had oil changed at Jiffy Lube...man that filter was tight and quite a bit smaller than the Motorcraft Fl-820S.



    Found this under the carpet on the driver floorboard??

    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

  3. #33
    Super Moderator newbiestangowner's Avatar
    Join Date
    Mar 2014
    Location
    Burlington,Ont
    Posts
    2,747
    Quote Originally Posted by Old Fart View Post
    Did a 10W30 oil change tonight. Do I have a screwed-up oil dipstick or are they all like that, lol.



    Former owner had oil changed at Jiffy Lube...man that filter was tight and quite a bit smaller than the Motorcraft Fl-820S.



    Found this under the carpet on the driver floorboard??

    ???? What’s that


    Sent from my iPhone using Tapatalk

    2014 GT- MT 82, 3.73,Roush a/b, Forgestar f14 19x9/10 firestone firehawk indy 500- 255 F /285 R ,BMR springs sp009, pan hard, koni yellows ,m/m caster,
    MGW XSPEC low profile 2.625in throw
    slo turd 5.0, even slower driver

  4. #34
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    2,754
    Some kind of foam tabs. But why would they be under the carpet in the middle of the driver's floor area and making a "bump"?
    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

  5. #35
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    45,514
    Yes all the sticks look like that.
    Oil change places have an alternate part number filter.
    Nice on the 10w30.

  6. #36
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    2,754
    Got the Borla's installed. Getting too old to do this on car ramps, in gravel and spending one hour looking for a lost nut (which I didn't find).



    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

  7. #37
    nom nom nom RedSN's Avatar
    Join Date
    Mar 2014
    Location
    Markham
    Posts
    11,341
    nice install!
    looks like an easy bolt-on.
    -Don____________
    “Aerodynamics are for people who can't build engines.” - Enzo Ferrari

  8. #38
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    2,754
    Thanks. Very easy. Hardest part was removing the stud nuts without breaking the studs...and lack of shoulder room.
    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

  9. #39
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    45,514
    WOWzers

  10. #40
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    2,754
    Finally figured out the gas mileage...21 mpg!! This is half town and half highway. Right in line with what Ford said it would do. I thought it was much worse.
    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service