Quote Originally Posted by fast Ed View Post
Yes Gary, as mentioned the PP1 and PP2 cars use the same brakes and basic suspension geometry (no difference in track widths like the GT350), so you would be good to go. And you could put PP2 wheels on a PP1 car, just need to add a bit of negative camber on the front.


cheers
Ed
I was under the impression that PP2 are 1" wider each - making them track 2"'s wider over the PP1 either with backspacing or wider wheel - is that not correct? I have the PP1 and you can see a definite difference in side wall gap between the wheel and the fender compared to the pp2 - If so maybe adding positive camber to the pp2 may be better...?