Loading...
Remove Text Formatting

Likes Likes:  4
Results 1 to 6 of 6

Thread: Pinion Seal

  1. #1
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    13,828

    Pinion Seal

    Can a pinion seal be replaced without having to remove the pinion?
    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

  2. #2
    Posting and liking.... Ponyryd's Avatar
    Join Date
    Mar 2014
    Location
    Windsor area
    Posts
    2,768
    Yep, mark a paint line across the nut down the threads, remove the nut, swap the seal, apply loctite to the nut and install in the same position.

  3. #3
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    13,828
    Cool...thank you!!
    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

  4. #4
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,213
    +1 on the above, be sure, make that 100% sure you do not go past your mark.

  5. #5
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,213
    If leaking, double check vent, gut it to prevent further issue.

  6. #6
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    13,828
    Quote Originally Posted by ZR View Post
    If leaking, double check vent, gut it to prevent further issue.
    10-4!
    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service