S197 Seats in a New Edge

[Zippy]

Might have to look in to it some more over winter. I LOVE my Braum seats but they are not so universally loved by passengers.

Psh, screw the passengers, they are just added weight.

[maxwell6]

Hey Old Fart I also installed a set of 07 seats and once you do you will be glad you did. You will need to fab brackets for them they dont line up. But if you can weld your good to go. I had a line on a set of recaros but that didn't pan out. I also swapped the connector for the seat power and works like a champ.

[ZR]

^ got a pic of em?

[maxwell6]

Also just make sure you mount them as close to the center console as possible, or they will rub on the door and drive you nuts.

[maxwell6]

Will post a pic in a bit just gott go take one.

[maxwell6]

Resized_20211112_074114.jpegResized_20211112_074058.jpegResized_20211112_074149001.jpegResized_20211112_074241001.jpeg

[Zutz2v]

Resized_20211112_074114.jpegResized_20211112_074058.jpegResized_20211112_074149001.jpegResized_20211112_074241001.jpeg

Those look stunning


Sent from my iPhone using Tapatalk

[Old Fart]

Hey Old Fart I also installed a set of 07 seats and once you do you will be glad you did. You will need to fab brackets for them they dont line up. But if you can weld your good to go. I had a line on a set of recaros but that didn't pan out. I also swapped the connector for the seat power and works like a champ.

Also just make sure you mount them as close to the center console as possible, or they will rub on the door and drive you nuts.

Thanks for the tips!

[Laffs]

Man that looks friggin good, rear seat as well?

[maxwell6]

No not the rear front only.