Loading...
Remove Text Formatting

Likes Likes:  83
Page 7 of 7 FirstFirst ... 34567
Results 61 to 67 of 67

Thread: Ram 1500 Warlock

  1. #61
    Member
    Join Date
    Mar 2014
    Posts
    5,420
    Nice touches

  2. #62
    Member WidowrRacing's Avatar
    Join Date
    Apr 2014
    Location
    Bowmanville
    Posts
    1,001
    Thanks!

    I picked up Nite shades to tint the rear light above the cab and to lightly smoke the rear taillights....but my son is trying to talk me out of it. He likes the contrast and thinks I’ll spray them to dark.

  3. #63
    Mustang Occasionally
    Join Date
    Mar 2014
    Location
    At my home.
    Posts
    4,699
    It now looks like one of those Rams that turns on it’s red and blue lights after passing it

  4. #64
    Member WidowrRacing's Avatar
    Join Date
    Apr 2014
    Location
    Bowmanville
    Posts
    1,001
    First time towing the enclosed with the GT inside it...I didn’t have my spotter (son) while loading the car so I pulled it in to far forward and the weight wasn’t distributed properly for the drive there.
    On the way back with his help I positioned it properly and it was noticeably better.
    The truck pulled really well using the tow haul mode and the brake controller worked great.
    Also real happy with the exhaust choice. It’s exactly the sound I was looking for.



    I think with the addition of the SumoSprings it will be a lot better.
    They will be on my list when the boarder opens back up.


  5. #65
    Member WidowrRacing's Avatar
    Join Date
    Apr 2014
    Location
    Bowmanville
    Posts
    1,001
    The Warlock got the Krown rust treatment in Bowmanville last month and a Black series tonneau cover before winter. Also lightly tinted the 3rd brake light to match the factory tails. Truck is nearly 2 model years old now with 4000kms on it.

    Last edited by WidowrRacing; 12-21-2020 at 10:20 AM.

  6. #66
    Member WidowrRacing's Avatar
    Join Date
    Apr 2014
    Location
    Bowmanville
    Posts
    1,001
    Swapped the OEM air filter and decided to try something different vs K&N oil type.





    Noticed this in the air filter box and decided to leave it because removing it requires breaking the plastic tabs off. I’m assuming if removed it would increase the induction noise and sound better when dropping the hammer.



    Also after more research into the rear “sag” situation when towing I decided to go this route:





    All the reviews I’ve read are great!
    I called the manufacturer prior to ordering and they were very helpful selecting the proper spring for my needs.

    Install planned for the spring and I’ll determine at that point if a front levelling kit is required. I’ll also compare the stockers to these.
    Last edited by WidowrRacing; 01-16-2021 at 02:56 AM.

  7. #67
    Member WidowrRacing's Avatar
    Join Date
    Apr 2014
    Location
    Bowmanville
    Posts
    1,001
    Checked out some RAM forums and found out that other filter in the air box is a carbon filter -installed for when you shut your motor off the intake venting fumes will be captured. I think Dodge started installing them in 18+ cause some members with 17 and older said they didn't have them.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service