Loading...
Remove Text Formatting

Likes Likes:  1
Results 1 to 5 of 5

Thread: Changing Intercooler Coolant

  1. #1
    Member
    Join Date
    Jul 2014
    Location
    Calgary
    Posts
    1,125

    Changing Intercooler Coolant

    Wondering what the best procedure is for doing this. I have a Moroso Intercooler tank which I see has a valve to empty it....but wondering how to get the rest of the fluid out of the system and then refilled.

    Any suggestions appreciated.

  2. #2
    Member bbriann's Avatar
    Join Date
    Mar 2014
    Location
    Port Elgin
    Posts
    618
    Probably air compressor tank supply would work. I have flushed my engine coolant system with tap water garden hose , then blew out with air, then refilled

    Little 2V 700+ RWHP, Pump Gas
    10.46 sec @ 136 mph

  3. #3
    Member
    Join Date
    Jul 2014
    Location
    Calgary
    Posts
    1,125
    ^^^ I was thinking of draining the fluid I can.....then adding water (and maybe a cooling system cleaner of some sort) and then hard wiring the IC pump to run the fluid through for a bit....then drain & repeat a couple of times?

  4. #4
    Member
    Join Date
    Mar 2014
    Location
    Burlington!
    Posts
    1,020
    Make sure to bleed it properly after, I had to keep squeezing the hose coming out of the pump to get the air out.

  5. #5
    Member
    Join Date
    Jul 2014
    Location
    Calgary
    Posts
    1,125
    Quote Originally Posted by Slick_89_Hatch View Post
    Make sure to bleed it properly after, I had to keep squeezing the hose coming out of the pump to get the air out.
    Did you leave the cap off the IC reservoir as well?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service