send me your E mail and I can send it a lot bigger for you if you need it.
Loading...
|
send me your E mail and I can send it a lot bigger for you if you need it.
2003 Azure Mach 1.....with some bolt on's.....
2003 Marauder.....with some bolt on's....
2011 GT500......with some bolt on's.......
82 GT, Coyote, build in play.......
Jeff you have the Cobra AC compressor in yours now obviously right? Its a GT harness right, adapted to the 4v? Any chance the AC clutch is killed in the tune? I believe you can fuck with the tables that kill the clutch at WOT any chance it's some reason perma shut down?
^^^^^^^^^that changes things up, what mods have been done, different power train, harness switched up??, not all CCRM are the same ….
2003 Azure Mach 1.....with some bolt on's.....
2003 Marauder.....with some bolt on's....
2011 GT500......with some bolt on's.......
82 GT, Coyote, build in play.......
stock GT CCRM cobra motor.
its not in the tune i have the tune lol.
So after some investigating i have a 2000 gt body harness with a cobra engine harness and cobra pcm...
the body harness was never touched...
sooo looking at pcm diagram pin out
4.6L 2v air conditioning cycling switch input is pin 41
on 4.6 4v cobra 2003 it is pin 41 is a/c high pressure switch
so same thing
only dif i see is 4.6L 2v pin 86 is ac high pressure switch
pin 69 on cobra is ac clucth relay control.. and on 2v is wot ac control relay
but not sure what that really means i would assume pin 69 is the same? i would want to maybe throw pin 86 from the body harness into pin 86.
any inputs before i start some slippery road to hell.