Loading...
Remove Text Formatting

Likes Likes:  7
Results 1 to 9 of 9

Thread: SN95 Horn Mounting

  1. #1
    Club Supporter Laffs's Avatar
    Join Date
    Mar 2014
    Location
    Windsor, ON
    Posts
    4,554

    SN95 Horn Mounting

    Anyone have any pictures of where the factory horns mount in these cars? Trying to get horns to work again in this car, ever since they were "relocated" for the meth pump they haven't worked. Assuming based on how the bracket and wiring looks they ground directly to the frame rail then get 12v + from the two black plugs.
    Quote Originally Posted by ludacris View Post
    I'm Supercharged with the HideAway License Plate

  2. #2
    nom nom nom RedSN's Avatar
    Join Date
    Mar 2014
    Location
    Markham
    Posts
    11,062


    Driver side, behind the parking light. You can just barely see the top of the horn through that hole. I will try and find a better pic of when I was doing the oil cooler.
    -Don____________

  3. #3
    Member
    Join Date
    May 2014
    Location
    Milton
    Posts
    834
    I have my driver fender off on my fox that I can send pics, if someone can confirm it is the same arrangement. Same spot as what Don references above

  4. #4
    Club Supporter Laffs's Avatar
    Join Date
    Mar 2014
    Location
    Windsor, ON
    Posts
    4,554
    It looks like I'm missing a bracket. From what I can tell there should be a a metal V bracket bolted to frame horns, and the horn assembly bolted to that.
    Quote Originally Posted by ludacris View Post
    I'm Supercharged with the HideAway License Plate

  5. #5
    Member 1BAD92LX's Avatar
    Join Date
    Mar 2014
    Location
    North Bay
    Posts
    1,167
    973031EE-1DE3-48FC-AA5F-BDBB8735AC1B.jpeg

    Hopefully this is helpful?
    Stock engine Fox equipped with the Maximum Motorsports catalog. Now I have lots of Trick Flow stickers.

  6. #6
    Club Supporter Laffs's Avatar
    Join Date
    Mar 2014
    Location
    Windsor, ON
    Posts
    4,554
    It is. I'm absolutely missing a bracket.
    Quote Originally Posted by ludacris View Post
    I'm Supercharged with the HideAway License Plate

  7. #7
    Member bbriann's Avatar
    Join Date
    Mar 2014
    Location
    Port Elgin
    Posts
    618
    My build thread has photos of my relocated horn beside my meth pump in fender.

    Little 2V 700+ RWHP, Pump Gas
    10.46 sec @ 136 mph

  8. #8
    Club Supporter hammerhead's Avatar
    Join Date
    Jun 2018
    Location
    Melancthon,Ontario, Canada
    Posts
    2,725
    88686A6A-CE9D-424A-9AF9-41F774982E4E.jpg this 1988 fox was pretty horny - left front corner under the washer fluid thingy - ahhhh the 80’s I remember them well #oxymoron lol
    1979 Pace Car 302 4spd
    1981 Cobra t-top option - power to be determined, in the works

  9. #9
    Club Supporter Laffs's Avatar
    Join Date
    Mar 2014
    Location
    Windsor, ON
    Posts
    4,554
    So bolted the assembly right to the frame with a rivnut, nothing. Flap wheeled the area it contacted as well as the bracket horns ground to and bam have horns. And they LOUD. Seems like these things need a really good ground.
    Quote Originally Posted by ludacris View Post
    I'm Supercharged with the HideAway License Plate

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service