So since installing the FTBR bushing kit I've developed a clunk in the rearend.
It was probably there all the time but masked by the OEM bushings.

Noise always seems to come from the PS rear. Happens backing up, going forward, and the odd time between shifts.
I have gone thru and checked all the torque on the bolts, everything is tight.
Driveshaft angle is good.

How can I check the halfshafts for play? Do they need to be out of the car?
What about the diff/clutch packs? Anyway to check without tearing it all apart.

Thanks

Sent from my KB2005 using Tapatalk