Loading...
Remove Text Formatting

Likes Likes:  1
Results 1 to 6 of 6

Thread: Foxbody IRS swap

  1. #1
    Member
    Join Date
    Feb 2018
    Location
    mississauga
    Posts
    7

    Foxbody IRS swap

    Recently installed front 94/95 Mustang front spindles and an IRS from a 2004 Cobra in to my Foxbody. Big issue here finding wheel fitment for this set up especially for the rear. Can anyone help me out on this.

  2. #2
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,219
    Hopefully either Gabe or Suki chime in, both have Mod Fox's.

  3. #3
    Member
    Join Date
    Jul 2021
    Location
    Hamilton ON
    Posts
    3,121
    05+ stock Mustang rims fit pretty well. I use Bullits.

  4. #4
    Member
    Join Date
    May 2014
    Location
    Milton
    Posts
    834
    Yes, 05+ wheels work well.
    Currently I have 18 x 9.5” wheels with +38mm backspacing with 275 35 18 rubber all around, direct bolt-in in the back with 1/2” spacers and extended studs in the front.

    I have a set of 18 x 9 +38mm 2018 Mustang PP2 chrome replica wheels with 245 40 18 Nitto NT05’s for sale that are a perfect fit on the car if you are interested

  5. #5
    Member
    Join Date
    Jul 2021
    Location
    Hamilton ON
    Posts
    3,121
    just checked, stock Bullets are 17x8 x45. There's room for fatter.

    Control arm and K member used will affect the front. I do use spacers, but 1/4 or 3/8. My cars haven't been on the ground in a while so I don't recall exactly.

  6. #6
    Member
    Join Date
    Feb 2018
    Location
    mississauga
    Posts
    7
    Yes i am interested can I get a phone number off you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service