thanks, learned something new today. It's probably obvious but I had not ever even looked at the icon bar for link, insert image, insert video prior to just now.
Loading...
|
thanks, learned something new today. It's probably obvious but I had not ever even looked at the icon bar for link, insert image, insert video prior to just now.
New clutch fork for a V8 Fox can still be bought from Ford. E6ZZ-7515-A, MSRP is about $41.
cheers
Ed
Plain white wrapper GT500 coupe
Instagram: ed._nicholson
Your Ford dealer in the west GTA - Kennedy Ford Sales
www.kennedyford.ca - please use the Kennedy Ford SVT TMC account for parts inquiries
I am not sure what the question is now, but "BadShoeProductions.com" had a video floating around "How To Rebuild the Tremec T5 Transmission" by a Ford Tech. Does a full rebuilt and assembly.
Well, sorry I must be one of the few that moved his videos.
Found he was a Ford Senior Master Technician with over 40 years experience was more than worth it to me.
Showed how to take it apart properly and included the few T5 tricks for proper assembly that shows 40 years of doing it right the first time.
I've never set up an adjustable pivot ball. I have two longer 16912's for T56 so I'm just going to cut one shorter for the T5.
From what I've seen the tranny has to come out to adjust. If this is the case I can see a minimum of 3 in-outs. Not a big deal but I'm also dropping and pulling the motor so I'm thinking about setting the pivot ball up with motor and tranny out and on the stand/bench.
Any experienced hands want to weigh in on this.
I've got to go find the flywheel and clutch so it's back to treasure hunting.