Loading...
Remove Text Formatting

Likes Likes:  18
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Fox interior bits

  1. #1
    Member 1BAD92LX's Avatar
    Join Date
    Mar 2014
    Location
    North Bay
    Posts
    1,167

    Fox interior bits

    For things like new door seals, removing/replacing the sagged out map pockets on the door panels and steering wheel type stuff, where's the best place to buy from?
    Is the stuff from LMR any good?
    Last edited by 1BAD92LX; 03-11-2022 at 03:01 PM.
    Stock engine Fox equipped with the Maximum Motorsports catalog. Now I have lots of Trick Flow stickers.

  2. #2
    Member
    Join Date
    Jul 2021
    Location
    Hamilton ON
    Posts
    3,121
    I've been happy with LMR, but haven't bought anything in the 2-3 years so can't vouch for current quality standards. The one thing that was off for me was a seal for a factory sunroof. It was too thick and never compressed to proper size even after several years.

  3. #3
    Member 1BAD92LX's Avatar
    Join Date
    Mar 2014
    Location
    North Bay
    Posts
    1,167
    I might do this but use the right colour

    https://www.youtube.com/watch?v=S6143x7T6ao
    Stock engine Fox equipped with the Maximum Motorsports catalog. Now I have lots of Trick Flow stickers.

  4. #4
    Member 1BAD92LX's Avatar
    Join Date
    Mar 2014
    Location
    North Bay
    Posts
    1,167
    B883855B-0A5A-494C-957B-29B991F59B3E.jpeg

    Is possible to fix this pitting? Just sand it smooth?
    I’ve read to use trim black paint colour
    Stock engine Fox equipped with the Maximum Motorsports catalog. Now I have lots of Trick Flow stickers.

  5. #5
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,219
    Sand smooooooth, prime then shoot with paint.

  6. #6
    Member 1BAD92LX's Avatar
    Join Date
    Mar 2014
    Location
    North Bay
    Posts
    1,167
    What is your black trim paint of choice, Rick?
    Stock engine Fox equipped with the Maximum Motorsports catalog. Now I have lots of Trick Flow stickers.

  7. #7
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,219
    Don't use it often enough to have an opinion. Our previous go to flat / semi gloss paint (hasn't been available for over a year) was used for pretty much everything with great results.

  8. #8
    Club Supporter FABMAN's Avatar
    Join Date
    Mar 2014
    Location
    Woodbridge
    Posts
    1,225
    I believe most refinish in satin black trim paint from SEM. Not sure what availability looks like at the moment though.

    From all the DIY videos I have seen the trim restoration is a relatively simple but tedious time consuming kind of project where prep, sand and clean is the vast majority of the work.
    FABMAN

  9. #9
    Member 1BAD92LX's Avatar
    Join Date
    Mar 2014
    Location
    North Bay
    Posts
    1,167
    We must have watched the same YouTube video. Will try to find that SEM brand trim paint somewhere.
    Stock engine Fox equipped with the Maximum Motorsports catalog. Now I have lots of Trick Flow stickers.

  10. #10
    Club Supporter Old Fart's Avatar
    Join Date
    Mar 2014
    Location
    Timmins
    Posts
    13,839
    Mike

    04 GT
    89 LX...bye-bye!!
    67 Cougar x 2...should have kept them!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service