Loading...
Remove Text Formatting

Likes Likes:  22
Results 1 to 7 of 7

Thread: Exhaust shops for DD repair?

  1. #1
    Club Supporter
    Join Date
    Mar 2014
    Location
    Bolton
    Posts
    7,564

    Exhaust shops for DD repair?

    Hey all, my daily has an exhaust leak and a local Volvo indy shop I use suggested going to an exhaust shop to see whether the bad part can be cut out and replaced versus buying a new exhaust/catback (didn't see it on the hoist but I think it's after the downpipe/cat).

    I was thinking about Hot Rod Scott's in Etobicoke but I think their focus is more custom work? (will call them tomorrow to check)

    Any other options for exhaust pipe cut and weld around town? TIA

  2. #2
    Member
    Join Date
    Sep 2014
    Location
    London
    Posts
    593
    If it is a Volvo muffler and been replaced by Volvo, the parts could be covered under warranty.

  3. #3
    Peekaboo, I see you! True Blue's Avatar
    Join Date
    Apr 2014
    Location
    Woodbridge
    Posts
    1,815
    Zoro Muffler in Mississauga, great service at a reasonable price.

  4. #4
    Club Supporter
    Join Date
    Mar 2014
    Location
    Bolton
    Posts
    7,564
    Quote Originally Posted by redo75 View Post
    If it is a Volvo muffler and been replaced by Volvo, the parts could be covered under warranty.
    It's the original exhaust front to back on a 2006 so no warranty there. Thought I would be replacing the catback but the shop said the rest of the pipe is in good shape so should be able to replace a section.

  5. #5
    Super Moderator newbiestangowner's Avatar
    Join Date
    Mar 2014
    Location
    Burlington,Ont
    Posts
    3,653

    Exhaust shops for DD repair?

    Text me later if u wanna come over,
    Just bring your replacement




    -
    -
    -

    - Carline muffler ( Burlington)
    Budget place no frills
    Brought Mazda 3 same problem , they cut rusted section replaced pipe

    2014 GT- MT 82, 3.73,Roush a/b, Forgestar f14 19x9/10 firestone firehawk indy 500- 255 F /285 R ,BMR springs sp009, pan hard, koni yellows ,m/m caster,
    MGW XSPEC low profile 2.625in throw
    slo turd 5.0, even slower driver

  6. #6
    Member
    Join Date
    Sep 2014
    Location
    London
    Posts
    593
    I saw one of those finger slicers before, with a 10" saw blade - who in there right or wrong mind would make one of those???????????????????

  7. #7
    Club Supporter
    Join Date
    Mar 2014
    Location
    Bolton
    Posts
    7,564
    Thanks for the input - went to Zorro in Mississauga and they fixed the issue (replaced flex pipe piece and repaired hanger bracket).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service