Loading...
|
A little.lost in the convo so the controller I have would not work.and a cobra fan would be better. What relay would I need?
Sent from my SM-G900W8 using Tapatalk
Controller you have is not rated high enough (amps) to handle either Taurus or Cobra fan.
Relay Controllers and Accessories
The 2sp controller will control all of the two speed Ford cooling fans, including the 3.8L Taurus fan correctly, the low speed circuit is calibrated to turn the fan on low at 185F, but is adjustable over a wide range of temperatures. The high speed circuit turns the fan on high at 10 degrees higher in temperature while disabling the low speed circuit instructions The 2sp2 controller uses an 80A relay for the high speed circuit, along with additional circuitry to control two of the two speed Ford cooling fans, including the 3.8L Taurus fan correctly, the low speed circuit is calibrated to turn the fan on low at 185F, but is adjustable over a wide range of temperatures. The high speed circuit turns the fan on high at 10 degrees higher in temperature while disabling the low speed circuit instructions AccessoriesThe L102 indicator connects to the controller high speed output. By sensing the fan speed, the indicator switches from green (low speed) to yellow (high speed) instructions
Link to above vendor, not cheap but worth every penny.
http://www.dccontrol.com/
Sadly that is all too common. Demand for them is always high. Wish someone else made a unit of that quality.
wifes car runs 170 in the hottest days with a/c on and beating on the car 306 12 psi v1 s-trim lentech aod stock rad with a flexlite fan