Whats in your parts bin / on your to do list for spring?

[BOOOSTD]

...but just for shitz and gigglez (and for Dave's and Rob's amusement)

here's the engine parts bin.


just recently added a billet distributor to the pile.

Nice little pile of goodies u got there!

[Slick_89_Hatch]

...but just for shitz and gigglez (and for Dave's and Rob's amusement)

here's the engine parts bin.


just recently added a billet distributor to the pile.

DO IT DON!!!!!!!!!!!!!!!!!!!!!!!!! Stop being a wussy wuss and get some powa in that car!

[The Newmare]

shorts and a t-shirt!!!!!

[Nsty04SVT]

Cobra:

2 Rear Tires required
Replace clutch - Centerforce DF
Change Fluids/filters
Inspect rear diff cover

Lightning:

Replace Stereo
Replace factory Mid pipe and Cat Back
Install 6 LB Pully
Traction Bars
90mm SCT Mass Air Meter
Tune
Change all fluids/filters
Pull diff cover replace fluid add friction modifier - to correct rear end chatter

[Slick_89_Hatch]

For the 89:
MM Coilover kit with 275# springs
MM Non offset Tubular A arms
MM Bumpsteer kit
MM Hybrid Steering shaft
03 GT Steering Rack
Stock position Urethane rack bushings
Try out my Centerline Autodrags with some slicks

For the 96:
Rear Sportline springs to bring the rear down 1/4 to 1/2"
Steeda SFC's
97 GT Wheels
New tires
New drivers door handle/insert on the interior door handle

[Not4you]

Parts Bin:
Speed of Sound Pillar Gauge Pod
Autometer Steering Column Gauge Pod
Autometer Water Temp, Oil Temp, Oil Pressure gauges
Caliper Rebuild Kits
Front Bearings
Front/Rear EBC 'Red' Brake Pads
Stainless Braided Brake Lines
Toyo R888 track tires


Wishlist:
MM Adjustable Rear Control Arms
Track day at Telladega Super Speedway
Track day at Barber Motorsports Park
Barrett Jackson Las Vegas


Shoulda happened but now won't
MM tubular k-member and arms
Oil Filter relocation kit

[FoxRod]

Parts Bin:
Koni Yellow front struts and rear shocks
H&R Super Sport Springs
Steeda Full Length Subframe connectors
MM CC Plates

WishList:
More Suspension mods (MM)
4 wheel disc- 5 lug conversion
rims/tires
Engine-more power

[Ray721]

Billet fuel door, oil catch can.

Maybe more in the coming weeks. Who knows lol.

[92redragtop]

Definite:
MM Panhard Bar and Torque Arm

Maybe:
Driver side fender
Cowl hood
Trunk lid without luggage rack

[Scott]

Have all the pieces, just need to do the work. Based on the weather forecast for next week should get some garage time squeezed in between honey-do-list tasks.

• American Racing Headers Off Road X-Pipe
• Corbeau Harness Bar
• Ford Racing X-Brace and Rear Seat Delete
• Relocate IAT Sensor to an Intake Runner
• Shorten Differential Housing 1” per side - Completed
• Strange Engineering 35 Spline Axles, Spool and C-Clip Eliminator - Install underway
• Ford Racing 4:10 - Install underway
• BMR Suspensions Adjustable Tubular A-Arms (to replace current Non-Adjustable Arms)
• BMR Suspensions Upper Control Arm Mount
• BMR Suspensions Polyurethane Differential Bushing Kit
• BMR Suspensions Boxed Subframe Connectors
• Fore Triple Hat (Dual Pump) Return Style Fuel System
• Fore Vacuum / Boost Manifold
• Flaming River Battery Disconnect Switch
• SLP Line Lock Kit
• SVT GT500 Front Air Splitter - Completed