Can't upload the pic of the etest. Tried 3 devices and it won't let me...
Loading...
|
Can't upload the pic of the etest. Tried 3 devices and it won't let me...
"Without Warning, Without Conscience"
email it to me and I'll post
sled.head@sympatico.ca
Sent Rick...
"Without Warning, Without Conscience"
If it was mine, would manually bring the idle up to a c hair over 1000 / 1100 and dump a jug of methyl hydrate in it.
Could try and retest with vacuum line off the fpr?
Yes I thought about dropping a ball bearing in vac line to FPR. And reconnecting...atleast with that done it will pass the visual test anyhow I will also adjust the idle screw up a bit too.
"Without Warning, Without Conscience"
Or do nothing and retest.
0.05 is nothing.
...although your HC is also almost a fail.
Sounds more like bad cats to me.
-Don____________