Loading...
|
Rock Auto you can get a remanufactured computer for about $250.00 cnd. they stock both 5 speed and auto units.
Look up Ford/model year/Mustang/5.0L V8/Electrical/Engine Control Module (ECM Computer)
Conversion harness with instructions is easy to find, several vendors offer it.
http://www.latemodelrestoration.com/...Wiring-Harness
Ya, the harness and MAF is the easy part..it's finding the computer and getting someone to part with it at a reasonable price the hard part..A guy in Ottawa had some stuff up today on Kijiji..A9L for $125 plus some other EFI stuff at a good price..Ottawa is too far for me tho
you realize only a 89 harness will work for you conversion unless you repin it, then you'll need to do ALL the other rewiring (aka fuel relay wires to drivers side) 90 by itself, 91-92,93 different found this out the hard way and got a 90,92 and a 93 harness on the self. then repinned it but not the relay wires and it died when coming to a stop. did the 89 harness and all probs gone... oh and you need the o2 harness that matches the stick or auto...
been buying up all the 89's i come across for future builds
find out if he's a member here and get him to mail it???
Easy to follow install vid here, you'll be installing the conversion harness into your existing one along with moving a few wires around on the pcm plug itself.
http://www.latemodelrestoration.com/...Wiring-Harness
Ya, watched that one 20 times already..seems straight forward but I'm gonna take it to a shop and let them do it, just for piece of mind