Wheel help!

[Slick_89_Hatch]

Looking for help....I am possibly purhcasing these ROH Snypers from a guy in Chicago but they have been machined for a different rear stud.
In order to use them with stock rear studs, ill need to use lugs like these:

http://www.jegs.com/i/McGard/671/610...oductId=755855

Would it be difficult to figure out the size I need? Here is a link to the wheels that shows the machining done. I really need to figure out if this is a big deal prior to purchasing!

http://www.thechicagogarage.com/foru...ont-tires.html

THANKS!

[Parkway Ford Lincoln SVT]

Should be fine with the shank lug nuts (and washers that go with them). Only thing is that the washers will be visible, so then the appearance front to rear will be slightly different if that is a concern.

[Ponyryd]

No biggie and a good deal as long as you can get them shipped reasonably. Go for it.

[Slick_89_Hatch]

The light difference is not really a concern. I really like these wheels and have wanted them for a long time! So you think finding the right size lug won't be too much of an issue?

[Ponyryd]

Piece of cake, just need the right diameter and depth, should be easy enough, I may even have some open end ones in my tool box if you get stuck.

[Slick_89_Hatch]

Awesome thanks! I've never looked into lugs like these before.

[Canuckcleaner]

What are you going tk do with your anniversary cobra wheels????

[fast Ed]

Norm, if you do grab these, I can help with ordering the proper lugs to go with them.


cheers
Ed

[Slick_89_Hatch]

Thanks Ed I really appreciate it!

[Slick_89_Hatch]

I have someone that is going to buy them provided I get these wheels.