Loading...
Remove Text Formatting

Likes Likes:  2
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Steeda MT-82 Transmission Mount Bushing

  1. #1
    Gotta Have It Green Rino's Avatar
    Join Date
    Mar 2014
    Location
    Toronto
    Posts
    629

    Steeda MT-82 Transmission Mount Bushing

    537868593_steeda-mt-82-transmission-mount-bushing-insert-2011-2015-555-4037(4).jpg ok will be installing this as soon as I get some car stands. Not sure where mine went,lol cant find them anywhere.
    GHIG

  2. #2
    Gotta Have It Green Rino's Avatar
    Join Date
    Mar 2014
    Location
    Toronto
    Posts
    629
    I installed the bushing.Right away I could feel the tightness of the shifter.It feels more precise.the shifts are even better then when the tranny is up to temperature. The only thing that I could say is a small minus is the noise,and a little more vibration felt through the tranny. I'll take it thuogh ,shifting feels much better,and the shifter doesn't move as much under hard acceleration.Good buy, I.M.P.O.
    GHIG

  3. #3
    Member Ray721's Avatar
    Join Date
    Mar 2014
    Location
    Bowmanville
    Posts
    1,686
    Have you considered the MGW shifter?
    Follow me on Instagram @ray721_14gt for car pics and general shenanigans

    Because Rayscar!!!!

  4. #4
    Gotta Have It Green Rino's Avatar
    Join Date
    Mar 2014
    Location
    Toronto
    Posts
    629
    I am looking at a couple right mow. I want to lower the car and tint the windows. I plan on doing the shifter over the winter. I'm also going to N.J. in September, so might come back with one.
    GHIG

  5. #5
    Member Ray721's Avatar
    Join Date
    Mar 2014
    Location
    Bowmanville
    Posts
    1,686
    I wouldn't consider anything else. I tried the Barton bracket, didn't work. The blowfish bracket didn't work. I drove Elton's (Toxix) car that has the MGW installed and it's the best feeling shifter period. Hopefully I'll have one over the winter if I can keep working.
    Follow me on Instagram @ray721_14gt for car pics and general shenanigans

    Because Rayscar!!!!

  6. #6
    Super Moderator newbiestangowner's Avatar
    Join Date
    Mar 2014
    Location
    Burlington,Ont
    Posts
    3,653
    Yup I'm with Ray on this one- I think the MGW race spec is the way to go

    2014 GT- MT 82, 3.73,Roush a/b, Forgestar f14 19x9/10 firestone firehawk indy 500- 255 F /285 R ,BMR springs sp009, pan hard, koni yellows ,m/m caster,
    MGW XSPEC low profile 2.625in throw
    slo turd 5.0, even slower driver

  7. #7
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,736
    Installing one of these bad boys in the next week or two (05 GT / 5.0 3V), driving impressions to follow.


  8. #8
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,736
    As for shifter, zero doubt MGW has the absolute best shifter for those trans.

  9. #9
    Super Moderator Scrape's Avatar
    Join Date
    Mar 2014
    Location
    GT-A
    Posts
    9,264
    MGW is awesome and I am sure the bushing makes a huge difference.

  10. #10
    Admin ZR's Avatar
    Join Date
    Mar 2014
    Location
    Toronto, On
    Posts
    36,736
    Install video, interested to hear how you like it long term.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SiteUptime Web Site Monitoring Service