Steeda MT-82 Transmission Mount Bushing

[Armen]

The Barton, Steeda, Blowfish brackets and the tranny bushing (Whiteline makes one too) are little fixes to the flaws of the MT-82. Some people have success and others don't seem to. I liked my Barton two post. After I installed it I never had an issue again - including at the track where you know the issue will surface, if it's going to at all.

But researching the MGW, you can see that this isn't just simply a shifter replacement. The design is such that it mounts more directly to the transmission, subsequently preventing that lockout so many experience. It's a serious piece. But it's a significantly more pricey option than the above mentioned fixes (as it should be, of course). It's a new more compact design now too, and easier to install, apparently.

If you can spend the money, the MGW Race Spec seems to be the direction to go.

[Ray721]

Hrrnnngg!!

[ZR]

^ Game changer right there.

[Rino]

I like the feel of the shifter,it make a big difference. What I dont like is the noise, and vibration. I think I'm going to do the little "Drill two holes" trick on the bushing.It's suppose to get rid of the noise and vibration,with out affecting the feel.

[Rino]

That MGW shifter is definitely going to be one of my purchases.