Hoping for a little help. My SCT flasher won't boot up when plugged into my 96 cobra - but boots when i plug it into my other vehicle. Tried my buddy's flasher and it also didn't boot up in my stang.

I was able to measure 12V on pin 16 - so I'm definitely getting power to the port. However, I was not able to measure the 12V through Pin 5 which is supposed to be the chassis ground. This leads me to believe that the ground is bad.

Does anybody know where this wire is grounded to the chassis? Hoping someone will know before I start taking the dash apart!!

Thanks

Rich