Hey guys i somehow got my hands on a Blowfish Racing shifter bracket before anyone else.

This thing is sweet! First impression is good. Shifts are smooth and direct. Under heavy load the shifts aren't much different then just cruising. It's impressive.

I accelerated while turning and did a 1-2 shift without any nibble or lock out. Repeated a little faster doing a 2-3 shift also without issue. Everyone knows shifts get ALL fucked up under some load while turning.

Took off from a dig the best I could and power shifted 1-2-3-4. No drama, nibble, grind, lockout, nothing! This bracket actually works! It also doubles as an NHRA drive shaft which is perfect if you want to drag!

It's not all sunshine and rainbows though. The NVH increase is quite noticable so I have to adjust it.

I'm gonna jack it back up tomorrow morning and lower the shifter another 1/8" or 1/4". It's pretty obvious to see the shifter is too high. I installed the upper bracket leaving a 1/8" gap in the slots as per instructions but I think it needs more. The vibrating noise goes away when I push the shifter down about 1/4"

I'll update as things progress. So far I'm super happy with it regardless of having to tweak it.

If you have a Manual 2011+ this is a MUST HAVE ITEM!!!