Originally Posted by
ZR
May be partially due to how much speed you needed to scrub off to make 6 then trying too hard to make up time. More time to be trimmed by figuring out the right entrance approach angle to 7 so you can steer virtually straight through it and 8 and set up for 9. My own car is faster between 9 and 10 when I scrub off x tra speed so as to keep to the left side of 9 which in turn allows a good pull into the entrance to 10 also leaving me in the best possible entrance into 10.
I do the same between 3 and 4 by holding the speed down off 2 and staying wide then cutting hard to the inside of 3.
Worth trying if those corners are a problem for you.