looks good!
Loading...
|
Can't wait to hear it.
Follow me on Instagram @ray721_14gt for car pics and general shenanigans
Because Rayscar!!!!
before:
after:
no engine load for both.
Is the drivers side sticking out farther or is it the picture? Sounds awesome.
once again, picture/perspective.
if i get out my depth micrometers, we may be able to measure a difference.
UPDATE.
the Shelby is apart in my garage, OEM h-pipe and exhaust manifolds are off. both headers are in place, drivers side has 6 bolts in loose, passanger side is hanging from the EGR tube.
many, many thanks to Kyle Merrill for hleping me get this far.
Friday I'm back at it:
- finish header install
- reinstall fues panel
- reinstall battery
- install FRPP twin 65MM TB
- install 127mm JLT CAI
- double check all connections
- with video rolling, fire car with open headers
Saturday:
- install catted h-pipe
- get car ready to be flat bedded to Rev'N High for install of 2.4" blower pulley, 90mm idler, gates blue belts (blower and accessory drive), 3.73 gears and a few odds and ends.
- Diego tune.
And how do you spell BEAST