How did you make out?
Loading...
|
Changed the fuse and everything works perfect, thanks ZR. Now on to figuring out how to hook up the stupid egr tube for my etest. Running a 1 inch spacer so now The tube is too short.
^^^same thing with mine.
cut the EGR tube and splice in an extension
-Don____________
Ok new problem. I ordered an egr spacer from edelbrock and it looks like it's going to work except that now my tall valve covers are in the way. I'm using the the talls because I switched to stud mount rockers and the OEM vc's wouldn't work. Will fox valve covers give me the clearance I need for stud mounts and a low enough profile to fit the egr spacer?
Fox covers, should only require baffle removed plus some grinding of the baffle mounting flanges.
That's what my research seems to be saying as well. Thanks ZR.
If the baffles are removed won't I be sucking more oil than I should be though?
Baffles in place are always preferred but tons of them out there get by just fine. You could also consider a thicker valve cover gasket or perhaps a VC spacer (if clearance to intake allows) to retain either stock covers or non modded Fox.