https://www.partsengine.ca/45810-vp-...iABEgJyj_D_BwE
Or just put a freaking Yak rack on the back of the camper.
Loading...
|
https://www.partsengine.ca/45810-vp-...iABEgJyj_D_BwE
Or just put a freaking Yak rack on the back of the camper.
There’s gotta be a solution with a tonno cover lol , so much in truck market , I agree those solid folds gets heavy.
Only options I have found are you n a solid one piece tonnou (which isn’t an option because if I’m not around and my wife needs to move something for work. She can’t lift off herself.)
Or soft rolling tonnou. Which isn’t an option due to in my area they just cut the cover and steal your crap.
I’ll look into the tack rack by my canoe is 17 ft long so may not work. Same reason I’m hesitant about a rack on the roof off the truck. Makes for a lot of overhang.
https://www.agricover.com/images/lom...n-S.-Dodge.jpgAccess LOMAX
It's a between the rails hard panel folding
https://www.autoeq.ca/access-lomax-h...over-dodge-ram
Because it's between the rails you can run any pocket mount rack system like the ones shown, or use the Access optional system the Adarac
https://shop.agricover.com/product/lomaxandadaracpro
Seen that one. Still trying to find a local dealer. And the sites that have it only have it listed up to 2015 for the f150.
Not sure what is different that it wouldn’t list up to 2018
Made some calls and found a dealer for the Adarac. 675 for the pro.
They confirmed it’s a stake pocket mount and should work with the ford rolling aluminum cover